igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (1)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (2)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (3)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (4)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (5)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (6)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (7)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (8)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (9)
igeIEINCG3A Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering (10)
Integrated Engineering

Audi 3.0T B8 B8.5 Spjällhus 80mm Uppgraderings Kit (S4 & S5) Integrated Engineering

Artnr:
igeIEINCG3A
|
(0 omdömen)
IE gasspjäll uppgradering tar bort den sista restriktionen på bilar med kompressor från fabrik. 
10889 KR
Antal: 
Lägg i kundvagnen
Lagerstatus  0
Leveranstid  5-15 vardagar
  • Produktbeskrivning
  • 80MM THROTTLE UPGRADE

    Already running a Dual Pulley setup on your Audi 3.0T supercharged engine and looking for more? IEs Throttle Body Upgrade kit removes the final power restriction from the factory equipped supercharger. Release the complete power potential from your factory supercharger with an 80mm throttle body and matching IE software (free upgrade for existing Dual Pulley customers).

    LARGER THROTTLE BODY 20% MORE FLOW OVER STOCK THROTTLE

    UP TO 548 HORSEPOWER ON DUAL PULLEY SETUP

    NO DIY WIRING PLUG & PLAY HARNESS INCLUDED

    FLAWLESS INSTALL

    Your new throttle body kit includes a new air intake inlet silicone adapter that is a direct fit to IEs Cold Air Intakes. This creates a perfect high-flow transition from the intake velocity stack directly to the new 80mm throttle body. No modifications or extra adapters required! *IE Cold Air Intake (hard pipe) required for no-modification install

    STOCK THROTTLE IS ROBBING YOUR POWER

    Your factory-installed throttle body has a smaller inlet than the supercharger that functions perfectly fine on stock power levels. However, on higher power setups running dual pulleys, heat exchangers, higher octanes, and Stage 2 Dual Pulley ECU calibrations this small restriction becomes a major dam for airflow unable to keep up with aftermarket performance parts requesting more flow. By increasing the size of the throttle body with our smooth transition cast-aluminum adapter the supercharger can fully breathe to its utmost capability.

    SIZE MATTERS

    Before the design phase, engineers performed flow bench and power tests of multiple throttle body sizes to determine the best throttle body size to include in our kit. This is a delicate balance. While easier to fit, smaller throttle bodies do not completely open up the factory restriction while larger 90mm throttle bodies resulted in no extra power gains. The included 80mm throttle body offers the most power available from a size standpoint when upgrading your throttle body.

    SIZE IS NOTHING WITHOUT FLOW

    The larger throttle body is only one part of the equation, simply creating an adapter plate and bolting on a larger throttle body creates abrupt changes and inhibits air flow. The included IE throttle adapter is cast and CNC machined from aerospace quality aluminum creating a smooth transition from the larger throttle body to the supercharger inlet.

    FREE ECU TUNE CALIBRATION

    Throttle body upgrades require matching ECU software to run and perform correctly. IEs Throttle Body ECU Tune is available as a free upgrade for all existing IE Stage 2 Dual Pulley owners. Dont already own IE Dual Pulley? The Throttle Body update is also included with all Dual Pulley tunes when purchased at no additional cost.

    STOCK OPERATION

    Your car will be up and running in no time, by simply flashing the Throttle Body Upgrade software and plugging in the new throttle body with the included extension harness. There are no electrical trick boxes or funky harnesses to give you issues.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    S4

    2009-2015 (B8-B8.5)

    3.0T SUPERCHARGED

    AUDI

    S5

    2013-2015 (B8.5)

    3.0T SUPERCHARGED

    AUDI

    A6

    2010-2018 (C7/C7.5)

    3.0T SUPERCHARGED

    AUDI

    A7

    2010-2018 (C7/C7.5)

    3.0T SUPERCHARGED

    *IE Cold Air Intake required for no-modification install

    Teknisk specifikation

    Artnr:
    igeIEINCG3A
    Tillv. Art: IEINCG3A
  • Passar till
  • AUDI 3.0T B8 B8.5 (S4 & S5)
  • Varumärke
  • Integrated Engineering Integrated Engineering (IE) specialiserar sig på prestandadelar till Volkswagen och Audi. Integrated Engineering fick sin plats bland entusiaster genom att ge snabb support och kvalitetsprodukter. Sortimentet erbjuder ECU-uppgraderingar, remaps, insug & luftfilterkit, intercoolers och downpipes.
    IE har innovativa produkter som underlättar trimningen av din VAG-bil.
  • Tillbehör & Reservdelar
  • Garanti
  • Omdömen:
  • För att lämna ett omdöme bör du tidigare köpt denna produkt samt på din kundprofil.

Rekommenderat för dig

Mer från Integrated Engineering

Logga in
Vänligen ange ditt användarnamn och lösenord för att logga in
Användarnamn
Lösenord